Setting The Implement Width; Changing The Hour Display; Changing The Minute Display - Valtra HiTech T3 Series Operator's Manual

3.9.7.4

Setting the implement width

GUID-962D81DE-047B-41F0-92F0-5F75B1B7600C
1. Implement width
1. Activate the implement width in the setting mode.
2. Change the value.
3.9.7.5

Changing the hour display

GUID-990D5FA6-9017-48A5-AD61-2D78C7B81B90
1. Hour display
1. Activate the hour display in the setting mode.
When the hour display is blinking, you can set the hours.
2. Change the value.
3.9.7.6

Changing the minute display

GUID-84EFC7C0-AF26-4691-AFC7-538C2792B4D5
1. Minute display
1. Activate the minute display in the setting mode.
When the minute display is blinking, you can set the minutes.
2. Change the value.
1
1
1
- 139 -
3. Operation