Changing Oil In The Front Axle Hubs; Changing The Fuel Filter - Valtra T144 Operator's Manual

4. Maintenance
4. Fill new oil through the inspection hole up to the level of the hole.
4.7.5.3

Changing oil in the front axle hubs

Change oil in the front axle hubs periodically.
GUID-C0F09D35-6D75-4446-BCE0-7011C65F97A0
1. Inspection hole
1. Turn the wheel until the inspection hole is pointing downwards.
2. Unscrew the plug and drain the oil into a suitable container.
3. Turn the wheel until the line of the inspection hole is horizontal.
4. Fill up with oil to the level of the hole.
5. Clean the plug and refit it.
4.7.5.4

Changing the fuel filter

Change the fuel filter periodically.
Always use original AGCO parts fuel filters.
IMPORTANT: Using other fuel filters than the original ones, even for a short
period of time, may cause lower performance and expensive damages.
NOTE: In extremely dusty or cold conditions, change the fuel filter and prefilter
every 600 hours.
NOTE: When using first generation Biodiesel fuel with dilution over 7%, change
the fuel filter and prefilter every 500 hours. With second generation Biodiesel fuel
the service interval is 1000 hours.
1
- 314 -