Deactivating Front Axle Suspension - Valtra HiTech T3 Series Operator's Manual

3. Operation
2. Release the switch.
When the calibration is done, the light goes out.
3. If the flashing does not stop within 2 minutes, start the calibration again.
3.8.19.3

Deactivating front axle suspension

1
GUID-44EBB37E-A899-49B8-812A-5B81D0FCFF67
1. Front axle suspension deactivation / AutoComfort calibration switch
1. Check that the power shuttle lever is not in the parking brake position.
2. Press down the side of the switch opposite to the symbol.
- 119 -