Table of Contents
Advertisement
3. Operation
•
To start the rear PTO with the PTO switch:
•
•
•
To start the rear PTO with the rear PTO on/off push button (extra equipment):
1
GUID-4958FCFB-0B02-4AE3-A231-8C8F0D00D3C3
1. Rear PTO on/off push button
•
•
3.17.2.4
Stopping rear power take-off temporarily
You can stop the rear power take-off (PTO) temporarily in the following ways:
•
By using the rear PTO switch.
•
By using the rear PTO speed control lever.
•
By using the rear PTO on/off push button (extra equipment) on the rear
mudguard.
Activate the standby mode by setting the rear PTO switch to the standby
(centre) position.
Start the rear PTO by pressing down the symbol side of the PTO switch
and releasing it.
The indicator light on the instrument panel is lit.
1
GUID-135DF10F-1DC4-4E6B-A81C-6FF0F38FCCCD
1.
Switch for rear PTO
Set the rear PTO switch to the standby position (centre) before leaving
the tractor.
Press the rear PTO on/off push button continuously for at least 3 seconds.
The PTO starting begins after 0.5 seconds. If the pressing is interrupted
during these 3 seconds, the PTO stops.
- 198 -
Advertisement
Table of Contents
