Attaching To The Mechanical Jaw; Attaching To The Automatic Jaw - Valtra HiTech T3 Series Operator's Manual

3.20.3.2

Attaching to the mechanical jaw

You can attach a trailer to the mechanical jaw using the coupling lever.
1
2
GUID-24CCFE2A-AFFA-49EA-9BF2-F810A30DA7AE
1. Ring
2. Coupling lever
• Pull up the ring at the top of the coupling lever to lift up the towing pin.
3.20.3.3

Attaching to the automatic jaw

You can attach a trailer to the automatic jaw using the opening and locking levers.
Use a solid drawbar because of the rotating jaw.
IMPORTANT: Use only drawbar eyes which comply with the regulations and are
undamaged. When using other than the allowed drawbar eyes, the warranty
lapses and the responsibility of the manufacturer is no more valid.
WARNING: After attaching the trailer, check that the pulling pin is
completely down and locked.
WARNING: When using jaws where the towing pin is equipped
with a locking pin, make sure that the locking pin is locked when
attaching the trailer.
- 219 -
3. Operation