Cleaning Front Axle Suspension Bellows - Valtra T144 H Service Manual

Maintenance

Cleaning front axle suspension bellows

To ensure correct function of the front axle air
suspension, the dirt in the bellows of the suspension
and in the housing have to be occasionally removed.
1. Detach the protective housings of the suspension
bellows, if necessary.
2. Wash the bellows with a pressure washer.
3. Keep the pressure washer nozzle during washing
at a distance of at least 30 cm from the bellows.
The temperature of the washing water must not
be higher than 50°C.
NOTE:
Do not use special nozzles, such as turbo
nozzles, when washing. Follow the instructions of
the pressure washer manufacturer.
4. Install the protective housings back to the
suspension.
Model
T4 HiTech
21.5.2015
Page
7