Track Widths; Agricultural Front Axle Track Widths - Valtra HiTech T3 Series Operator's Manual

Hide thumbs Also See for HiTech T3 Series:
Table of Contents

Advertisement

4. Maintenance
Tyre
650/65R38 FOR
650/65R38 GY
650/65R38 M
650/65R42
650/75R38
680/75R32 M
4.8.2

Track widths

The track width is measured between the middle of the tyres. If needed, adjust
the track widths.
IMPORTANT: The maximum allowed width of the tractor is 2550 mm (if larger
width is not nationally allowed).
The distance between the mudguards is 1090 mm at the rear.
In many work applications, it is advisable to adjust the track widths so that the
track made by the front tyres is covered by the track made by the rear tyres.
When using narrow track widths for the rear axle, check that the lower links do
not touch the tyres. When required, lock the side regulators.
IMPORTANT: According to EU directives the smallest allowed distance between
the tyre and the cab is 40 mm.
4.8.2.1

Agricultural front axle track widths

The agricultural front axle track widths (in mm) are listed in the following table.
380/85R28,
14.9R28
16.9R28,
420/70R28,
420/85R28,
440/65R28,
480/65R28,
480/70R28
Table continued on next page
2 135
2 045
1 930
2 045
1 930
- 308 -
Parameter value for T173
H-193 H, with 40 km/h
184
183
185
175
174
184
1 840
1 735
1 645
1 840
1 735
1 645
Parameter value for T153
H, and for T173 H-T193 H
with 50 km/h
166
166
168
159
158
167
1 530
1 530

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hitech t133 hHitech t153 hHitech t173 hHitech t193 h

Table of Contents