Table of Contents
Advertisement
1264C User Manual
What's In This
Chapter
Calibration
Service Strategy
Service Interval
Preparation
EADS North America Defense
Test and Services, Inc. © 1998
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This chapter provides information in regards to calibration and
procedures for inspecting and cleaning the 1264C, removing and
replacing mainframe components, and isolating problems to the
module level. Refer to Chapter 4 Understanding The 1264C for
theory of operation information.
The 1264C does not require calibration. To verify proper operation
see the Basic Functional Check section in Chapter 3.
The service procedures in this manual provide removal and
replacement procedures to repair the 1264C to the module level.
Module level repairs are accomplished by exchanging faulty
modules with known good modules or parts. No component-level
repair is provided in this manual.
Clean the fan filter (optional) at a maximum interval of six months.
Depending upon the amount of usage and ambient dust levels in
the operating environment, the filters may require more frequent
cleaning.
Clean dust from the mainframe exterior (and interior) as needed,
based on the operating environment. Periodic cleaning reduces
instrument breakdown and increases reliability.
The information in this section is designed for use by qualified
service personnel. Read the For Your Safety at the front of this
manual and Service Strategy before attempting any procedures in
this chapter.
Refer to Chapter 3 Operating The 1264C for
information on the location of controls, indicators, and connectors
used with the mainframe.
Chapter 5
MAINTENANCE
Maintenance 5-1
Advertisement
Table of Contents
