Table of Contents
Advertisement
1264C User Manual
Installation of
Rack Mount
Options
EADS North America Defense
Test and Services, Inc. © 1998
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1. Facing the front of the VXI mainframe, with one hand hold
the cover by the front end where the "Racal" logo
appears.
2. Select the slot to be covered by the cover. Insert the hook
at the rear of the cover into the rectangular slot at the
back of the cardguide (1). Apply a slight downward
pressure on top of the cover (with the other hand) at the
rear to engage the hook into the cardguide.
3. Slightly flex the cover upward at the front, maintaining
pressure at the rear, and lower the center hook of the
cover into the center rectangular slot in the cardguide (2).
4. Press down and back to allow both center and rear hook
to engage fully into the cardguide.
5. Lower the front of the cover and allow the snap-in hook to
rest on the cardguide (3).
6. With a slotted screwdriver or similar flat-bladed tool,
depress the spring hook (4) at a slight downward angle,
applying light pressure at the front end. This will cause
the snap-hook to firmly seat the cover into place.
7. To remove the cover, depress the snap-in hook (4) from
the front with a flat-bladed tool. This will unlatch the hook
and allow removal from the cardguide at the front end.
8. Pull forward to release the fixed hooks at the center and
rear.
Refer to page 5-41 for installation of Option 01, Rack Ears and
Slides (P/N 407670).
Refer to page 5-42 for installation of Option 04, Rack Ears only
(P/N 407671).
Configuring The 1264C 2-3
Advertisement
Table of Contents
