Table of Contents
Advertisement
1264C User Manual
Using This
Chapter
AC Mains Power
Site
Considerations
EADS North America Defense
Test and Services, Inc. © 1998
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CONFIGURING THE 1264C
This section includes basic procedures to install and configure the
1264C mainframe. Use this chapter to:
•
Review installation site considerations.
•
Install VXI modules or optional card guide covers and
blanking plates.
•
Connect the chassis/safety ground.
Installation
and
configuration
equipment is provided with the option.
When the standard 1264C is shipped, it is configured for 120 VAC
operation. Voltage selection switch S400 is set to the 115VAC
position.
Should it be necessary to replace the AC mains fuse (F400), refer
to Chapter 5: Removal and Replacement of the AC Mains Fuse.
Ordering Option 71 (P/N 407676) configures the 1264C for
applications powered by 230 VAC power. The voltage
selection switch S400 is set to the 230VAC position, a 6.3A
Slo-Blow fuse is installed into F400, and an international
power cord (P/N600858) replaces the domestic cord.
The 1264C Mainframe is designed to be used freestanding (bench
top) or in an instrument rack.
locations for the 1264C.
Chapter 2
information
for
NOTE:
Refer to Figure 1-5 for vent
Configuring The 1264C 2-1
optional
Advertisement
Table of Contents
