Advertisement
caulk in siding
gaps on both sides
of window.
70.
Locate Window Inserts. Before installing, dab caulk in siding channel on
both sides of window opening. This will prevent water from getting in behind win-
dow. Position window in cavity and secure with 8 - 1 1/4" Screws. Caulk gap
between siding and window at top. This requires a large amount of caulking but is
important to fill. Later, Window Trims will be installed to hide caulking. Complete
second Window Insert the same.
71.
Position Window Trim around window doing a dry run first
and attach with 4 - 1 1/2" Finishing Nails per piece. Window trim
has a small dado on reverse face. Outside flange of window will
roughly sit in the dado to give a better fit. Complete both
windows the same.
72.
Attach Door Handles and
Black Hasp. Handles and Hasp
are positioned on wide door trim
and mounted with 3/4" Black
Screws.
Hardware
Door Handles x 2 total
Black Hasp x 1 total
SB1 - 3/4" Screws x 16 total
Toll Free 1-888-658-1658
Dab
Trim dado
sits in flange.
www.outdoorlivingtoday.com
(Top pc - 24 1/16") x 1- Angle Ends
N1 - 1 1/2" Finishing Nails x 32 total
Pre-drill 1/4"
deep with 1/8" drill
bit for all door
hardware.
Page 42
caulk in siding
gap at top.
Requires a large
Parts
Window Inserts
(18 1/4" x 23") x 2
Hardware
S2 - 1 1/4" Screws
x 16 total
Parts
Window Trim Kit x 2
(Side/Bottom pcs - 23") x 3
Hardware
sales@outdoorlivingtoday.com
Run
amount.
Advertisement
