Advertisement
Outside
Inside Roof
Roof Batten
Batten
3 3/4"
38.
Locate 2 Outside Roof Battens and 1 Inside Roof Batten,
place on Roof Rafters. Place at top of Rafter section where Rafters
and Ridge boards meet. Battens should be positioned evenly on 3rd
and 6th Rafters. Battens will overhang outside Rafter by 3 3/4".
39.
Attach each Batten to Rafters with 3 - 1 1/4" screws per Batten. Important: pre-drill pilot
holes with 1/8" drill bit first to prevent splitting.
40.
Place Batten Spacer flush with first set of Battens on outside Rafter. Batten Spacer allows
you to line up next row of Battens. Attach each with Batten Spacer with 2 - 1 1/4" screws.
Toll Free 1-888-658-1658
Outside
Roof Batten
Hardware (Steps 38 - 44)
S2 - 1 1/4" Screws
92 x total
www.outdoorlivingtoday.com
Flush to Ridge Board
Page 25
Parts (Step 38 - 44)
Roof Battens Outside
(3/4" x 3 1/2" x 49 1/4") x 16
Roof Battens Inside
(3/4" x 3 1/2" x 45 1/2") x 8
Batten Spacer
(3/4" x 1 1/2" x 14 1/8") x 12
sales@outdoorlivingtoday.com
Advertisement
