Advertisement
31.
Carefully lift 1 completed Rafter Section up (make sure Soffit is facing down) and place on gable
framing.
Gable Notch
32.
Slide Rafter Section up on gable framing until bottom of Ridge Board slips into gable notch.
Soffit will sit approximately 1/8" away from wall panel.
33.
Place second completed Rafter Section on Gable Walls as per Steps 31 - 32.
Toll Free 1-888-658-1658
Soffit should sit approx.
1/8" away from wall
panel. End Rafter will sit
flush with end of wall.
www.outdoorlivingtoday.com
Page 22
Soffit
sales@outdoorlivingtoday.com
Advertisement
