Advertisement
Flashing overhangs
wall on outside.
26.
Place completed Gable section so framing sits flush with the inside of the Top Wall Plate. It
should also be centered side-to-side on the Top Wall Plate. Gable Flashing overhangs wall on the
outside. Temporarily attach to Gables and Top Wall Plate with 2 - 2" Screws. Gables may need slight
adjustment in Step 36 when attachment will be completed with an additional 6 Screws. Screw from
the bottom of Gable framing down into Top Wall Plate and Wall Framing. Complete Gable positioning
and attachment on the other side.
Hint: Use a straight edge to check the angle of the Gable framing and Top Plate. Both angles should
line up (see diagram above).
Toll Free 1-888-658-1658
Hardware
S3 - 2" Screws x 4 total
www.outdoorlivingtoday.com
Page 19
Use a straight edge to check
that angle of Gable lines up
with Top Wall Plate angle.
Adjust Gable for best fit.
sales@outdoorlivingtoday.com
Advertisement
