Advertisement
Do Not Attach Walls To
Floor Until Step 22
15.
Position side solid wall into place on plywood floor. Butt both vertical
wall studs of side and rear walls together and attach with 3 - 2 1/2" Screws.
Screw at the bottom, middle and top of stud to secure properly.
16.
With the corner wall attachment complete, position a second Side Wall panel in place so bottom
2x3 wall framing is sitting flush with outside floor joists and plywood floor. Wall siding should overhang
floor by approximately 4 1/2". When positioned correctly, attach both Side Wall panel studs together
as shown.
Toll Free 1-888-658-1658
Pilot Hole
first.
www.outdoorlivingtoday.com
Page 13
Optional - Caulking seams
will help prevent moisture
from entering your shed.
Caulking not included in kit.
Hardware (Steps 15 -17)
S1 - 2 1/2" Screws
x 18 total
sales@outdoorlivingtoday.com
Advertisement
