Advertisement
44.
Repeat Steps 38 - 43 to complete Batten Section on opposite side of roof with remaining
Battens and Batten Spacers.
45.
Locate 4 Metal Roof Panels and 4 Metal Roof Hangers. To
temporarily hold the Metal Roof Panels in place, hook a Metal Roof
Hangar onto the lowest Batten, approximately where the center of
the panels will be. Place first Metal Roof Panel on Battens and into
Hangar. Do not fasten panels down until Step 50. Place remaining 3
panels and hangers on the same way. Metal Roof Panels will overlap
each other.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 27
Parts (Step 45)
Metal Roof Panels
(39" wide x 61" long) x 4
Hardware (Step 45)
Y38 - Metal Roof Hangers
x 4 total
sales@outdoorlivingtoday.com
Advertisement
