Advertisement
24.
Next, attach the Front Top Plates. The Front
and Rear Top Plates are angle cut down the length.
Once again, position Top Plates on wall frame so
they are flush. Front and Rear Top Plates will fit
between Side Top Plates. Attach with 4 - 2" Screws
per plate. Complete all other Side & Rear Top Plate
attachments the same.
Toll Free 1-888-658-1658
Male / Female Gable
Siding Overlap
25.
both sides of the shed. Align framing and wall
siding lap together. Screw center wall framing of
each piece together with 3 - 2 1/2" Screws.
Note: Prior to attaching, try each combination of
Gables for best fit.
www.outdoorlivingtoday.com
Page 18
Locate Triangular Gable Half Walls for
Parts
Triangular Gable Half Walls x 4
Hardware
S1 - 2 1/2" Screws x 6 total
sales@outdoorlivingtoday.com
Advertisement
