Advertisement
36.
Roof Gussets are positioned on middle Rafters. Prior to attaching, make
sure walls are properly aligned. Have two helpers push walls at the top from the
outside of shed until inside to inside measurement between front and rear plates
is 91". Use a level to square Gusset. Attach Gusset with 4 - 2" screws.
1 1/4" Screw
2" Screws
Note: On the Door side of your shed pre-drill hole in Aluminum Door Header
when attaching rafter brackets.
37.
Attach all Single and Double Rafter Brackets
where rafters meet Top Wall Plates inside of shed.
Attach with 2 - 1 1/4" screws and 2 - 2" screws per
Single Bracket and 6 - 2" screws per Double Bracket.
Toll Free 1-888-658-1658
91" across
2" Screw
1 1/4" Screw
2" Screws
www.outdoorlivingtoday.com
2" Screw
S2 - 1 1/4" Screws x 12 total
S3 - 2" Screws x 36 total
Y30 - Single Rafter Brackets x 4 total
Y31 - Double Rafter Brackets x 2 total
Page 24
Parts
Roof Gussets
(3/4" x 3 1/2" x 72") x 3
Hardware
S3 - 2" Screws
x 12 total
Hardware (Step 37)
sales@outdoorlivingtoday.com
Advertisement
