Maico ERO-SCAN Operation Manual page 52

Pairing with a PC
Figure 52
Figure 53
Figure 54
Figure 55
5.10.2.3 Clearing Test Results
Figure 56
1
8106556 Rev. 11
Operation Manual ERO•SCAN
Activate the wireless connection on your PC (Figure 52).
The WIRELESS DEVICE menu allows the user to pair the
ERO•SCAN
®
with a PC to transfer test results (Figure 53).
DISCOVER to search for wireless devices (approx.
15 s). Display shows "Please wait" and
yellow LED (TEST) flashes.
CANCEL
to cancel discovery if wanted.
Discovered devices are displayed (Figure 54).
CHANGE
to select your PC.
PAIR
to pair with your PC.
If the display shows "WIRELESS PAIRED", the pairing
process was successful.
NOTE: If wireless pairing is unsuccessful or if any error
messages are displayed see Section 3.6).
MainMenu
to exit the wireless pairing menu.
The TEST RESULTS menu allows the user to clear the test
results stored in the device (Figure 56).
NOTE: After printing or transferring the test data to the PC
software, all tests saved in memory will be permanently
deleted as soon as a new test is started. It is not necessary
to manually clear the results using this menu.
CLEAR
to clear test results.
YES or NO to verify clearing or to cancel.
50
®
13//08/2020