Maico ERO-SCAN Operation Manual page 48

5.9.5 Printing Test Results
5.9.5.1 Printing to a Thermal Printer
NOTE: Make sure you have successfully paired your ERO•SCAN
printer before trying to start the print process.
Section
5.10.2.2
Figure 43
Figure 44
5.9.5.2 Printing After Data Transfer to PC
The actual printing process from the PC software depends on the used Software
product. Printing is possible directly from the following PC Software products.
• MAICO Sessions
• OtoAccess
®
Database
• HearSIM
TM
• Your Practice Management Software
Respective Software Manual
1
8106556 Rev. 11
Operation Manual ERO•SCAN
Wireless Device Pairing
To start the printing process, press:
UP
in the Main Menu to enter the Connect to
printer screen (Figure 43).
 
CONNECT to connect to the printer. Printing process
starts as soon as the printer is found. The
screen shows PLEASE WAIT (Figure 44).

CANCEL to cancel the printing process if wanted.
NOTE: All printed test results are marked for deletion but will
continue to be stored in memory until a new test is started at
which time all tests in the memory will be erased. This allows
the user to reprint the tests if printing is unsuccessful (for
example, the paper runs out before printing is complete).
46
®
®
device with the
13//08/2020