Maico ERO-SCAN Operation Manual page 31

Power on
Push power button
One short beep will be heard at power on, two short beeps at power off.
Figure 17
NOTE: Selecting Print on the ERO•SCAN
message. Printer must be on and in close proximity of the ERO•SCAN
proceed.
Charging Light Indicators
Table 7 MPT-II Charging Light Indicator
Green LED indicator
Off
Off
Off
Off
Off
On
Slow flash
Slow flash
Self-test
When printer is powered off, press and hold paper feed
power button simultaneously. When beep is heard after approx. 3 seconds, release
both buttons, and a test page will print with information on current status and character
samples.
1
8106556 Rev. 11
Operation Manual ERO•SCAN
for two seconds in order to power on or off.
Green Power indicator is lit if printer is powered by battery
(Figure 17).
®
when the printer is off will result in an error
Blue LED indicator
Fast flash
On
Slow flash
On
Off
Off
Slow flash
Off
29
®
for printing to
Status Sound
Charging -
Charging -
Battery nearly
-
discharged
Charging
-
completed
Charging
-
completed
Power ON,
battery -
powered
Out of paper Beep
Sleep mode -
button, then press and hold
®
Note
Power On
Power Off
-
Power On
Power Off
-
-
-
13//08/2020