Maico ERO-SCAN Operation Manual page 47

You can delete test data in the following ways:
Automatic Deletion
Save L/R Mode: A single test for the Left ear and a single test for the Right ear are
saved. Test data are deleted as soon as a new test for the left or right ear is started.
Save 500 Mode: Test data are deleted as soon as new Patient Names are uploaded
from the PC Software to the ERO•SCAN
deleted).
Printing: As soon as test data are printed via the thermal printer or transferred to the PC
software all tests are marked for deletion. You finally delete them by starting a new test.
Manual Deletion
To learn how to manually delete test results in the ERO•SCAN
Section 5.10.2.3
5.9.4 Transferring Test Results to a PC
It is possible to transfer data from the ERO•SCAN
• MAICO Sessions Standalone
• MAICO Sessions with OtoAccess
• MAICO Sessions with Noah Database
• MAICO Sessions with your existing Practice Management Software via
BDT/GDT interface
• HearSIM
TM
Software with OtoAccess
protocols TE 32s, TE 64s, DP 4s and DP 2s)
Connecting the ERO•SCAN
Connection to the PC software is achieved by using the provided Micro-USB to USB-A cable.
Before transferring data to a PC make sure that you have installed the PC software
properly according to the separately delivered operation manual. Before establishing
the PC-connection you will have to consider the recommendations given in Section
4.2.4 in case the ERO•SCAN
NOTE: The actual transfer process to the PC software depends on the used Software
product.
Respective Software Manual
1
8106556 Rev. 11
Operation Manual ERO•SCAN
®
(a warning is provided that data will be
Clearing Test Results
®
Database
®
Database (only results of the test
®
to a PC
®
is connected to a non-medical device.
45
®
device see:
®
to the following PC software:
®
13//08/2020