5.10.2 General Device Settings
5.10.2.1 General
The ERO•SCAN
®
allows the user to change many of the device settings or functions.
These settings include:
• Wireless Device Pairings
• Clearing Test Results
• Auto Shutdown Time
• Minimum Amplitude Value
• Save Mode
• Clock Mode
• Language
• Reset to Default Settings
Access the General Device Settings Menu
CHANGE
to access the PROTOCOL menu.
SETUP
to access the CLOCK menu.
CHANGE
to enter the WIRELESS DEVICE menu.
(hold for 3 s)
Press and hold for 3 s until the green LED (READY) turns off.
Figure 20
NOTE: It is also possible to set advanced options for the DPOAE and TEOAE tests.
Section 5.10.3
1
8106556 Rev. 11
Operation Manual ERO•SCAN
Advanced Settings Menus (Diagnostic Version only)
48
®
13//08/2020