Table of Contents
Advertisement
Warranted Characteristics
Table 2–15: Certifications and compliances
EC Declaration of Conformity
(TDS 500D and TDS 700D)
Australian Declaration of
Conformity – EMC
(TDS 500D and TDS 700D)
EC Declaration of Conformity
(TDS 600B)
EC Declaration of Conformity –
Low Voltage
2–26
Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EMC Directive 89/336/EEC:
EN 55011
EN 50081-1 Emissions:
EN 60555-2
EN 50082-1 Immunity:
IEC 801-2
IEC 801-3
IEC 801-4
IEC 801-5
Conforms with the following standards in accordance with the Electromagnetic Compatibility
Framework:
AS/NZS 2064.1/2
Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EMC Directive 89/336/EEC:
EN 50081-1 Emissions:
EN 55022
EN 60555-2
EN 50082-1 Immunity:
IEC 801-2
IEC 801-3
IEC 801-4
IEC 801-5
Compliance was demonstrated to the following specification as listed in the Official Journal of the
European Communities:
Low Voltage Directive 73/23/EEC
EN 61010-1:1993
TDS 500D, TDS 600B & TDS 700D Performance Verification and Specifications
Class A Radiated and Conducted Emissions
AC Power Line Harmonic Emissions
Electrostatic Discharge Immunity
RF Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Power Line Surge Immunity
Class A radiated and Conducted Emissions
Class B Radiated and Conducted Emissions
AC Power Line Harmonic Emissions
Electrostatic Discharge Immunity
RF Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Power Line Surge Immunity
Safety requirements for electrical equipment for measurement,
control, and laboratory use
Advertisement
Table of Contents
