Table of Contents
Advertisement
Warranted Characteristics
Table 2–11: Warranted characteristics — Time base system
Name
Accuracy, Long Term Sample Rate and
Delay Time
Table 2–12: Warranted characteristics — Triggering system
Name
Sensitivity, Edge-Type Trigger, Coupling
1
1
set to "DC"
e
Width, Minimum Pulse and Rearm, for
Pulse Triggering
lse igge i g
The minimum pulse widths and rearm
he mi im m
lse i ths a
2
2
widths and transition times
i ths a
t a sitio times
required for
Pulse-Type triggering.
lse
e t igge i g
2–22
Description
TDS 600B: 100 ppm over any 1 ms interval
TDS 500D/700D: 25 ppm over any 1 ms interval
Description
Trigger source
Any Channel
Auxiliary
For vertical settings > 10 mV/div. and 1 V/div at the BNC input
Pulse class
ea m
e i e o
Glitch
Runt
Time-Qualified
Runt
Width
Timeout
Slew Rate
TDS 500D, TDS 600B & TDS 700D Performance Verification and Specifications
Sensitivity
TDS 620B & 644B: 0.35 division from DC to 50 MHz,
increasing to 1 division at 500 MHz
TDS 680B & 684B: 0.35 division from DC to 50 MHz,
increasing to 1 division at 1 GHz
TDS 500D, 724D, & 754D: 0.35 division from DC to 50 MHz,
increasing to 1 division at 500 MHz
TDS 580D & 784D: 0.35 division from DC to 50 MHz, increasing to
1 division at 1 GHz
TDS 794D: 0.35 division from DC to 50 MHz,
increasing to 1 division at 1.5 GHz
TDS 600B: 250 mV from DC to 50 MHz,
increasing to 500 mV at 100 MHz
TDS 500D, 724D, & 754D: 400 mV from DC to 50 MHz, increasing to
750 mV at 100 MHz
TDS 580D & 784D: 250 mV from DC to 50 MHz,
increasing to 500 mV at 100 MHz
TDS 794D: 250 mV from DC to 50 MHz,
increasing to 500 mV at 100 MHz
Minimum pulse
width
Minimum re-arm width
1 ns
2 ns + 5% of Glitch Width Setting
2 ns
2 ns
2 ns
TDS 700D: 8.5 ns + 5% of Width Setting
1 ns
2 ns + 5% of Width Upper Limit Setting
1 ns
2 ns + 5% of Width Upper Limit Setting
2
600 ps
TDS 700D: 8.5 ns + 5% of Delta Time Setting
Advertisement
Table of Contents
