Replacing The Front Panel - HP Visualize J5000 Upgrade Instructions

Unix workstations
Hide thumbs Also See for Visualize J5000:
Table of Contents

Advertisement

System Board Removal/Replacement

Replacing the Front Panel

Replacing the Front Panel
1. Align the front panel to the hinge holes and insert the panel edge
hooks.
2. Swing the entire panel closed to the right
3. Screw the two T-15 Torx screws into the top and bottom corners of the
right edge of the panel.
4. Close the door on the front of the system and lock if desired.
28
Chapter 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visualize j5600

Table of Contents