HP Visualize J5000 Upgrade Instructions page 17
Unix workstations
Hide thumbs
Also See for Visualize J5000:
- Supplementary manual (214 pages) ,
- Owner's manual (212 pages) ,
- Handbook (178 pages)
Table of Contents
Advertisement
Disconnecting the Flex Cable
1. Locate the flex cable.
2. Remove the flex cable retainer by grasping it and lifting up as shown
Figure 2-4
Removing the Flex Cable Retainer
3. Remove the flex cable by grasping the connector handles on each side
Chapter 2
below.
and pulling them outward as shown below. This will loosen the
connectors; lift the flex cable away and set it aside.
System Board Removal/Replacement
Removing the Top and Side Panels
17
Advertisement
Table of Contents
Need help?
Do you have a question about the Visualize J5000 and is the answer not in the manual?
Questions and answers