HP Visualize J5000 Upgrade Instructions page 25

Unix workstations

Hide thumbs Also See for Visualize J5000:

Table of Contents

System Board Removal/Replacement

Replace the Bus Bar Shield

1. Replace the four T-15 Torx thumbscrews from the power supply bus

bar. The bus bar screws are longer than the other T-15 Torx screws.

Figure 2-10

Replace the Bus Bar Shield

Step 1: Replace the Bus bar Screws

Step 2: Replace the Bus bar Shield

2. Replace the bus bar shield as shown above.

Chapter 2

Table of Contents

Need help?

Do you have a question about the Visualize J5000 and is the answer not in the manual?

Visualize j5600