Table of Contents
Advertisement
2S Drive Systems / 0185-1174_E_1V1_SM_C1251-2S / NTI AG
7.5 Safety Parameters Overview
All parameters, used for the configuration of the different safety functions, are displayed in the LinMot-Talk in the
parameter section. There is a branch "Safety" which is colored yellow.
Figure 8: Schematics of a safe digital input (one channel)
7.6 Configure Safety Parameters
To configure the safety parameters, there are the following steps necessary:
Setting the parameters
Validate the parameters is done in the following steps:
Login
Verify Groups
Read ASCII Report
Print ASCII Report
Validate Parameters
All the steps above are described in the next chapters.
0185-1174_E_1V1_SM_C1251-2S / 2021-11-26 16:43 (Rev. 12500)
Page 59 of 150
Advertisement
Table of Contents
