Technical Data; Collection Bag - Meec tools Multi Series Operating Instructions Manual

EN

TECHNICAL DATA

Rated voltage
Max. speed, no load
Planing width
Planing depth
Sound power level, L
Sound pressure level, L
Vibration level, a
Main handle
Extra handle
Always wear ear protection!
The declared vibration value and noise, which
have been measured by a standardised test
method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 60745-2-14:2009+A2.
WARNING!
The actual vibration and noise level when
using the tools may differ from the specified
maximum value, depending on how the tool
is used and the material being processed. It
is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
24
10000 /min
0 – 1.5 mm
71.0 dB(A), K=3 dB
wA
82.7 dB(A), K=3 dB
pA
,
h W
1.5 m/s², K=1.5 m/s²
2 m/s², K=1.5 m/s²
DESCRIPTION
18 V
1. Wheel for adjusting the cutting depth
2.

Collection bag

60 mm
3. Power switch lock
4. Power switch
5. Battery
6. Safety switch
FIG. 1
ASSEMBLY
UNPACKING
Unpack all parts and place them on a level and
stable surface. Remove all packaging material
and any transport locking devices. Check that
all parts are included and undamaged. Take
care so no small parts are lost.
COLLECTION BAG
Fit the dust collection bag for dust and chips.
FIG. 2
USE
WARNING!
• Only use batteries and chargers
intended for Meec Multi Series. All other
use of batteries or chargers can involve a
fire hazard and personal injury.
• Do not use the electric planer if parts are
missing or damaged – risk of serious
personal injury.
• Use appropriate protective equipment to
avoid personal injury.
NOTE:
Make sure the material to be processed
does not contain metal objects or other hard
material that can damage the electric planer.