Special Safety Instructions - Meec tools Multi Series Operating Instructions Manual

– Ensure that the product is in good
condition and well maintained.
– Use correct attachments for the
product and ensure they in good
condition.
– Keep tight grip on the handles/
gripping surface.
– Maintain this product in accordance
with these instructions and keep it
well lubricated (where appropriate).
SAFETY INSTRUCTIONS
• Switch off the tool and wait until all
moving parts have completely stopped
before putting down the tool. Otherwise
the moving parts can catch on the surface
and cause the tool to move out of control,
which can result in serious personal injury.
• Hold the power tool by the insulated grips
when working in areas where it may come
into contact with concealed electrical
cables or its own power cord. Contact with
a live cable will cause the metal parts on
the tool to also become live – risk of
electric shock.
• Secure the workpiece on a stable surface
with clamps, or the like. Holding the
workpiece in your hand or against your
body will not give you a sufficiently firm
grip and can cause you to loose control.

SPECIAL SAFETY INSTRUCTIONS

• Switch off the tool and wait until all
moving parts have completely stopped
before putting down the tool. Otherwise
the moving parts can catch on the surface
and cause the tool to move out of control,
which can result in serious personal injury.
Symbols
The following symbols may be important for
how you should use your power tool. Make
sure you understand the symbols and their
significance.
Read the instructions.
Wear safety glasses and ear
protection.
Wear a breathing mask.
Approved according to current
EU directives.
Recycle as electrical waste.
EN
23