Vibration And Noise Reduction - Meec tools Multi Series Operating Instructions Manual

EN
connected and used correctly. The use of
such equipment can reduce the risk of
dust-related problems
USING AND LOOKING AFTER
POWER TOOLS
• Do not force the power tool. Use the
correct power tool for the planned work.
The tool does the job better and safer
when used at the rate for which it was
designed.
• Do not use the tool if it cannot be
switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
• Unplug the power cord before making any
adjustments, changing accessories or
putting the power tool away. These safety
precautions reduce the risk of accidentally
starting the power tool.
• Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
• Keep the power tool properly maintained.
Check that moving parts are properly adjusted
and do not jam, and that no parts are
incorrectly fitted or damaged. Check for other
factors that could affect functionality. If the
power tool is damaged, it must be repaired
before being used again. Many accidents are
caused by poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
• Use the power tool, accessories and bits
etc., in accordance with these instructions,
taking into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those they
are intended to be used for.
22
USING AND MAINTAINING BATTERY-
POWERED TOOLS
• Charge the batteries only with the charger
recommended by the manufacturer. The
use of another charger can result in the
risk of personal injury and fire.
• Only use batteries intended for the power
tool. The use of other batteries can result
in the risk of personal injury and fire.
• Do not allow batteries to come into
contact with paper clips, coins, keys, nails,
screws and other small metal objects that
can result in short circuiting. Short
circuiting the battery terminals can result
in the risk of burn injuries or fire.
• Incorrect use can cause liquid to leak from
the battery. Avoid touching this. Rinse
with water after unintentional contact.
Seek medical attention if you get battery
fluid in your eyes. Leaking battery fluid can
cause skin irritation or burn injuries.
SERVICE
The power tool must only be serviced by
qualified personnel using identical spare parts.
This will ensure that the power tool remains
safe to use.

VIBRATION AND NOISE REDUCTION

• Plan your work schedule to spread any
high vibration tool use across a longer
period of time.
• To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and
low-noise operating modes as well as
wear personal protective equipment.
• Take the following points into account to
minimise the vibration and noise
exposure risks:
– Only use the product as intended by
its design and these instructions.