Rack-Mount The Chassis; Unpack And Inspect The Chassis - Cisco FPR1150-ASA-K9 Hardware Installation Manual

Rack-Mount the Chassis

•
•

Unpack and Inspect the Chassis

Note
See Package Contents, on page 5
Step 1
Remove the chassis from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Rack-Mount the Chassis
The chassis ships with rack-mount brackets and screws that you can install on the front or the rear of the
chassis. We recommend you install the rack-mount brackets on the rear panel so that the chassis faces the hot
aisle. See
Unpack and Inspect the Chassis, on page 25
Rack-Mount the Chassis, on page 25
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or
any items are missing, contact your customer service representative immediately. Keep the shipping
container in case you need to send the chassis back due to damage.
Package Contents, on page 5
C H A P T E R
for a list of what shipped with the chassis.
for the rack-mount items in the accessory kit.
Cisco Firepower 1100 Series Hardware Installation Guide
3
25