Safety Information; Desktop Installation; Rack-Mounting The Chassis - Cisco MC3810 Series Quick Start Manual

Install Chassis and Connect Cables
1
2
2 E&M
E&M

Safety Information

Warning
Multiservice Access Concentrators
Hardware Installation Guide for safety
information you need to know before
working on the Cisco MC3810.

Desktop Installation

Caution
on a desktop, do not place anything that
weighs more than 10 pounds
(4.5 kilograms) on top of the chassis.
1
2
3
4
5
6
E&M
E&M
E&M
E&M
E&M
FXO
T1/E1
3
4
5 5
FXO 6
FXO
E&M
E&M
E&M
FXO
See the Cisco MC3810 Series
If you place the Cisco MC3810
T1/E1
Caution
They provide a space for air circulation.

Rack-Mounting the Chassis

Step 1
Note: Brackets are included. Screws are included
for attaching the brackets to the chassis, but not for
installing the chassis in a rack. You need four
additional screws to install the chassis in a rack.
Step 2
Front panel forward
Rear panel forward
Rear panel forward,
center-mount telco
Do not remove the rubber feet.
Choose one of the methods shown in the
above figure, and attach the mounting
brackets as shown.
Install the chassis in the rack.