Elba P90 Instructions For The Use page 22

IMPORTANT:
✓ Never turn union C using force without
first slackening nut A.
✓ Gaskets F (Fig. 5.1) guarantee the seal
of the gas connection.
Replace them whenever they are even
slightly deformed or imperfect.
✓ If using flexible metal pipes, make sure
they are not squashed, and do not
come into contact with moving parts.
✓ Any connection to fixed metal pipes
must be done in such a way so as
not to place undue stress on the hob
chassis.
✓ Any flexible pipes must be so installed
as to be easily inspected along their
whole length. They must be changed
before the expiry date (printed on the
pipe itself) and not exceed 2 metres in
length.
✓ After connecting to the gas mains,
check that the couplings are correct-
ly sealed, using soapy solution, but
never a naked flame.
ADAPTING THE APPLIANCE
TO FUNCTION WITH
DIFFERENT
TYPES OF GAS
If a gas different from that indicated on
the label is used, adapt the cooktop to
this new function.
Every cooking hob is provided with a set
of injectors for the various types of gas.
Injectors not supplied can be obtained
from the After-Sales Service.
Select the injectors to be replaced
according to the TABLE FOR THE CHOI-
CE OF THE INJECTORS.
The nozzle diameters, expressed in hun-
dredths of a millimetre, are marked on
the body of each injector.
22
Fig. 5.2