Elba P90 Instructions For The Use page 19

FASTENING THE
INSTALLATION BRACKETS
(fig. 4.4)
✓ Each cooker top is provided with an
installation kit including brackets and
screws for fastening the top to fixture
panels from 2 to 4 cm thick.
✓ Turn the cooker top upside down and
fasten the brackets "A" to the appro-
priate socket holes, without tightening
the screws "B" for the moment.
✓ Make sure that the brackets are fas-
tened as shown in figure 4.4.
Fig. 4.4
A
B
Fig. 4.5
A
C
A
FASTENING THE COOKER
TOP
(fig. 4.5)
✓ Spread the sealing material "C" out
along the fixture hole, making sure
that the junctions overlap at the cor-
ners.
✓ Insert the cooker top into the hole
and position it correctly.
✓ Adjust the position of the brackets
"A" and tighten screws "B" to block
the cooker top firmly in position.
✓ With a sharp cutter or trimmer knife
trim the excess sealing material
around the edge of the cooker top.
Take care not to damage the bench-
top.
A
A
A
A
19