Using The Hp Setup Program - HP Kayak XA User Manual

4 Technical Information
The HP Summary Screen and Setup Program
HP PC WORKSTATION XA 6/xxx - Copyright 1997 Hewlett-Packard - 3.0
BIOS Version
CPU Date Code
System RAM
Bank A
Bank B
Bank C
Bank D
System Cache
Video Device
1st IDE Device
2nd IDE Device
3rd IDE Device
4th IDE Device
ISA PnP
ISA PnP
<F1> to continue, <F2> to run Setup, <F10>to power off, <F5> to retain

Using the HP Setup Program

1 Turn on the display and then the computer. If the PC Workstation is
88
When you press
below) appears:
: HC.08.xx
: N/A
: 64MB
: 64MB
: None
: None
: Not available
: 512 KB (Synchronous)
: Cirrus Logic
: CD-ROM
: None
: None
: None
: Not Installed
: Not Installed
This screen gives you a summary of the current configuration
settings of your PC Workstation.
already turned on, save your data and exit all programs, then restart
the PC Workstation. Consult your operating system documentation
for any special instructions concerning turning off and then
restarting your PC Workstation.
English
the HP Summary Screen (similar to that shown
PC Serial Number
LAN Mac Address
Processor Type
COM1
COM2
COM3
COM4
LPT1
LPT2
LPT3
Flexible Disk A
Flexible Disk B
Display type
PCI Slot #1
PCI Slot #2
PCI Slot #3
: FR74011111
: 00-60-B0-5D-C9-2D
: Pentium II
: 3F8H
: None
: None
: None
: 378H
: None
: None
: 1.44 MB
: None
: Not Available
: PCI to PCI Bridge
: Not Installed
: Not Installed