Installing Mass Storage Devices; Connecting Devices - HP Kayak XA User Manual

Hp kayak xa: users guide
Hide thumbs Also See for Kayak XA:
Table of Contents

Advertisement

Data Connectors
NOTE
Some models are IDE-based
and some are SCSI-based. Your
PC Workstation will either
have a SCSI HDD cable or an
IDE HDD cable.

Installing Mass Storage Devices

You can install additional mass storage devices, if you need extra mass
storage space for your application software.
Your PC Workstation has one hard disk drive already installed. On some
models there is a second shelf which is available for a second hard disk.
Most models already have a LAN board or a SCSI/LAN board installed
on this shelf. If this is the case, a second hard disk drive cannot be
installed.
The PC Workstation has two front-access shelves for CD-ROM, zip, or
disk drives (a CD-ROM drive is already installed on the top shelf).

Connecting Devices

If you install a drive, you need to connect it to power and data cables.
The data cables are shown below.
IDE HDD cable
2 Installing Accessories in Your PC Workstation
CD-ROM cable
Installing Mass Storage Devices
SCSI HDD cable
Flexible Disk Drive
data cable (non-IDE)
English
35

Advertisement

Table of Contents
loading

Table of Contents