If Your Pc Workstation Has An Audio Problem; Enabling The Hp Front Panel Volume Control - HP Kayak XA User Manual

Enabling the HP Front
Panel Volume Control
Under Windows NT 4.0
Enabling the HP Front
Panel Volume Control
Under Windows 95

If Your PC Workstation Has an Audio Problem

Enabling the HP Front Panel Volume Control

To use the front panel volume control button, you must enable the
hardware volume control in the audio software settings.
To enable the hardware volume control, follow the appropriate section
for your own operating system, described below.
You can enable the HP Front Panel Volume Control from the Device tab
as follows:
1 Click the Start button and select Settings
2 Double-click Multimedia
3 In the list of devices, double-click the line
see the audio driver
. Click this and then click Settings.
Driver
4 Click the Enable Hardware Volume Control checkbox, and then click
OK to exit.
5 Check that the HP Front Panel Volume Control is enabled by first
double-clicking the speaker symbol
taskbar. Then select the Volume Control window and try to move the
volume level. If the volume level does not move, the HP Front Panel
Volume Control has been enabled.
You can enable the HP Front Panel Volume Control from the Device
Manager as follows:
1 Click the Start button and select Settings
2 Double-click System
3 In the list of devices, double-click the line
. You will see the audio driver
controllers
AD1816 Sound Controller
3 Troubleshooting Your PC Workstation
If Your PC Workstation Has an Audio Problem
and then click the Devices tab.
Audio for Analog Devices SoundComm
and then click the Device Manager tab.
. Click this and then click Properties.
Control Panel.
. You will
Audio Devices
in the right corner of the
Control Panel.
Sound, video and game
Analog Devices
English 73