Configuring Non-Plug And Play Isa Accessory Boards - HP Kayak XA User Manual

2 Installing Accessories in Your PC Workstation
Installing Accessory Boards
When you start your PC Workstation after installing an accessory
board, the Plug and Play BIOS automatically detects which hardware
resources (IRQs, DMAs, memory ranges, and I/O addresses) are used
by the system-based components.
Refer to the documentation supplied with the operating system to see
whether the operating system can automatically recognize and
configure Plug and Play boards.

Configuring non-Plug and Play ISA Accessory Boards

If you install an ISA accessory board that is not Plug and Play you will
need to configure the board before your PC Workstation can use it.
Refer to the documentation supplied with the operating system for
details on your operating system's capabilities and restrictions when
configuring non-Plug and Play accessory boards.
English 49