Starting The Scsi Configuration Utility; Main Menu - HP Kayak XA User Manual

NOTE

Starting the SCSI Configuration Utility

You access the SCSI Configuration Utility by pressing
message
Press F6 to start Configuration Utility...
displayed during the PC Workstation's start-up routine. A further
message is then displayed:
before the Main menu of the Symbios Logic SCSI
Utility...
Configuration utility appears.

Main Menu

The items shown on your screen may be different from those shown
below.
Symbios Logic SCSI Configuration Utility
MAIN MENU
1. SYM53C875
B ... Adapter Boot Order.
C ... Change Adapter Status.
D ... Display Mode = Verbose.
M ... Mono/Color.
F1 .. Help.
Q ... Quit.
Use arrow keys to select from menu. Then press ENTER
Use the and
corresponding key (B, C, D, etc), to make a selection from this menu.
You can only select an adapter if the current status is "On". Changes
are possible only if NVRAM (non-volatile memory on your adapter) is
present.
Please wait, invoking Configuration
Version 1.07
Port Irq ------Status------
Num Level Current
E800 3 On
BIOS Code Segment: C800
keys and the
4 Technical Information
Using the SCSI Configuration Utility
when the
NvRAM
Next-Boot Found
On Yes
key, or just press the
is
English 95