HP Kayak XA User Manual page 23

Reset Button
PC Lock Button
Power On Status Light
Hard Disk Activity Light
Network Activity Light
PC Lock Activity Light
NOTE
Press this button to reset the PC Workstation. With Windows 95 and
Windows NT avoid general use of this button as some file damage may
occur. Always shut down the PC Workstation using the Shut Down
command.
Press this button to lock the PC Workstation and make the screen go
1
blank . Any applications that are open remain active, but the mouse and
keyboard are locked until a password is entered.
This feature only works when both Administrator and User passwords
have been set. To unlock the PC Workstation, enter either password.
This light glows while mains power is supplied to the PC Workstation.
This light flickers when your hard disk drive is being accessed. The hard
disk activity light also works for a second hard disk drive (supplied by
HP).
This light flickers when network activity is taking place.
This light glows when PC Lock is active.
Refer to page 6 for more information about using the audio front panel
connectors.
1. Whether or not the screen goes blank is controlled by a setting in the
Setup program: Security User Password Screen Blanking. Refer to
page 87 for more information about using the Setup program.
1 Setting Up and Using Your PC Workstation
Your PC Workstation's Hardware Control Panel
English 13