Resetting The Keystone Adjustment - Canon RealIS WUX10 User Manual

Adjusting Image
3
When the keystone distortion has been adjusted, press the OK button.

■Resetting the Keystone Adjustment

Perform the following steps to reset the keystone adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window.
On the window, select [OK] with [<], and then press the OK button.
It cannot perform the keystone adjustment under the combinations shown in the following
table.
Signal
Analog PC
Compornent
HDMI
Signal type Resolution (dots)
SXGA 1280 x 1024
UXGA 1600 x 1200
1080i
1080i
54
Screen Aspect
[4:3], [16:9], [16:10]
– [16:9], [16:10]
– [16:9], [16:10]
[4:3]