Adjusting The Image Size - Canon ReallS SX80 User Manual

Adjusting the Image Size

Use the ZOOM button to adjust the size of the projecting image.
Change the projector installation position if your desired image is too large or too small to
adjust it with the zoom function. (P31)
1
Press the ZOOM button to pop up a window shown at the lower right.
Remote control
2
Press the pointer buttons to adjust the image size.
Remote control
[ ] / [ ]: Rough adjustment.
[<] / [>]: Fine adjustment.
3
When the image size is determined, press the OK button or the ZOOM button.
Top control
Top control
51
Adjusting Image