Initializing Network Settings; Resetting To The Default Setting - Canon RealIS WUX10 User Manual

Setting Various Function

Initializing network settings

[Other settings] -[Network setting initialization]
HDMI
DIGITAL PC
ANALOG PC
Other settings
Network setting initialization
You can Initialize the network settings.
Press the OK button after selecting [Net-
work setting initialization], and the follow-
ing screen for confirmation appears:
Yes The network settings is initialized.
No Initialization is aborted.
Press the OK button to accept your setting
and then press the MENU button.
• Initialized are "IP address" and other
items set in "Connecting the Projector to
Network" (P103).
• You can do this initialization also from a
Web browser. (P112)

Resetting to the Default Setting

[Other settings] - [Factory defaults]
COMPONENT
VIDEO
System settings
You can reset the menu item settings and
restore the system settings to the factory
defaults.
Press the OK button after selecting [Fac-
tory defaults], and the following screen for
confirmation appears:
Press the OK button to accept your setting
and then press the MENU button.
• This function cannot reset the value of
• For factory defaults settings, refer to the
100
HDMI
DIGITAL PC
ANALOG PC
Other settings
Factory defaults
OK Settings are reset to default.
Settings are not reset to default.
Cancel
[Lamp counter], [Language], [Remote
control], [Input signal] and [Network set-
ting] to default.
page 142,143.
COMPONENT
VIDEO
System settings