Initializing Network Settings; Specifying Pjlink Settings - Canon WUX6000 User Manual

Completing Projector Settings
Initializing Network
Settings
> [Network settings] > [Detailed
settings] >
initialization]
You can initialize the projector
network settings.
When [Network setting initialization] is
selected, the window shown below
appears. Select [Yes] then press the
OK button.
• The following items are initialized.
- Settings used for web login, such as the
network setting screen, user name,
password, and other settings
- Network password setting
- Network function
- Network standby settings
- Register network password
- PJLink
- DHCP
- IP address
- Subnet mask
- Gateway address
- E-mail sender address
- E-mail recipient address
- Projector name
- Comments
- AMX Device Discovery settings
- Crestron RoomView settings
Downloaded From projector-manual.com Canon Manuals
[Network setting
Specifying PJLink
Settings
> [Network settings] >
You can enable or disable the PJLink
network function of the projector.
When the function is turned on,
control is possible via the LAN using
commands that meet PJLink
standards.
Off Disables the PJLink function.
On Enables the PJLink function.
Press the OK button to accept your
setting and then press the MENU
button.
• [On] is the factory default.
• This projector conforms to Class 1 as
defined in the PJLink standards of the
JBMIA (Japan Business Machine and
Information System Industries Association).
This projector supports all commands that
are defined by PJLink Class 1, and has
been verified as conforming to the PJLink
standard Class 1 definition.
• For information about using PJLink, refer to
"Setting PJLink [PJLink]" (P187).
170
[PJLink]