Table of Contents
Advertisement
General Information
Introduction
Thank you for purchasing the WJS 100 Soldering System. This manual will provide you with the
information necessary to properly set up, operate, and maintain your system. Please read this manual
thoroughly before using the system.
The systems featured in this guide are available in either 115 VAC or 230 VAC versions. All of these
models incorporate Intelliheat™ technology. The 230 VAC version system bears the CE Conformity
Marking, which assures the user that it conforms to EMC 89/336/EEC. All models featured in this
manual are lead free compatible and comply with RoHS and WEEE directives.
Specifications
Operates on 97-127 VAC, 50/60Hz,
WJS-100
120 Watts maximum at 115 VAC,
60Hz
Temperature Specifications (All Models)
Tip Heater Cartridge Handpiece Tip Temperature Range: 205 to 455°C (400 to 850°F) nominal.
Digital Readout Resolution: ±5° (°C or °F)
Tip Temperature Stability: ±1.1°C (2°F) at Idle from Set Tip Temperature.
Temperature Accuracy: Meets or exceeds ANSI JSTD 001
EOS/ESD Specifications (All Models)
Tip-To-Ground Resistance: Less than 2 ohms.
AC Leakage: Less than 2 Millivolts RMS from 50Hz to 100MHz.
Transient Level: Less than 500mV peak, out to 100MHz.
Power Supply Features
F
G
WJS 100
C
©2010 PACE Inc., Annapolis Junction, Maryland All Rights Reserved
WJS-100/E
ST 50
J
I
E
H
Operates on 197-253 VAC 50/60Hz,
120 Watts maximum at 230 VAC,
50Hz
Page 3 of 11
O
P
Q
Advertisement
Table of Contents
