Table of Contents
Advertisement
Corrective Maintenance
Figure 12. Connector Plug Wiring
Power Source
Most malfunctions are simple and easy to correct. Refer to the table shown below to clear these
malfunctions.
SYMPTOM
No power to system.
No heat on handpiece.
Other handpieces work on
Power Source channel.
No heat on handpiece.
Other handpieces do not work
on Power Source channel.
Table II. Power Source Corrective Maintenance
CORRECTIVE MAINTENANCE
PROBABLE CAUSE
Blown Fuse (F1).
Defective Heater.
Defective control circuit.
SOLUTION
Replace fuse F1 located on rear of
Power Source in the AC
Receptacle/Fuse Holder.
See Table l or refer to handpiece
Manual.
Contact PACE Technical Support
25
Advertisement
Table of Contents
