Send The Screen To Beamer; Including The Notebook - KaVo EDUnet ULTRA HD Instructions For Use Manual

Instructions for use KaVo EDUnet ULTRA HD
8 Optional additional functions | 8.4 Send the screen to beamer
ð
The control light of the "Scan" key going dark and an acoustical signal being is-
sued indicates that the scan process is completed.
▶ Press the "Clear" key to switch to default status.

8.4 Send the screen to beamer

▶ Press the "Beamer" key to display the active sender screen on the beamer.
ð
The control lamp of the "Beamer" key is on.
▶ Press the "Beamer" key again to terminate the procedure.

8.5 Including the notebook

The "Notebook" key allows the notebook to be accessed like any other participant
station.
▶ Press the "Beamer" key.
ð
Beamer is turned on/off.
▶ Hold down the "Beamer" key until you hear an acoustical signal.
ð
This switches between beamer mode and local mode.
ð
The beamer works like an external monitor of the notebook.
ð
In local mode, the control light of the "Beamer" key flashes.
40 / 52