KaVo EDUnet ULTRA HD Instructions For Use Manual page 22

Instructions for use KaVo EDUnet ULTRA HD
5 First use | 5.1 Activating and deactivating the room keyboard
The identification number is issued the first time the room keyboard is turned on. It is
required for operation of MultiMaster. A total of five identification numbers can be is-
sued. If several room keyboards are used, each room keyboard may only be assigned
one identification number.
Note
If only one room keyboard is connected to the network, it is given the identification
number 1.
Note
An acoustic error message signals when an additional EDUnet room computer is
turned on.
Note
The identification number can still be changed at a later point in time.
Changing the identification number of the room keyboard
▶ If the EDUnet room keyboard is turned on, switch it to sleep mode. For this pur-
pose, press the "Clear" and "Remote control" keys simultaneously.
ð
This switches the EDUnet ULTRA HD into sleep mode.
▶ Hold down the "Release help request" key and press the "Clear" and "Remote
control" keys simultaneously.
ð
This switches the EDUnet ULTRA HD into active mode again.
▶ Hold down the "Release help request" key until you hear an acoustical signal.
▶ Release the "Release help request" key.
ð
The LEDs of the five keys in the top row from the left flash.
▶ Assign the identification numbers with the number keys.
ð
The keyboard automatically initialises and goes to standby.
22 / 52